Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Replacement Across San Fernando
A full roof replacement in San Fernando typically runs $9,500 to $18,500 depending on square footage, tear-off layers, and decking condition, with most 1950s-60s tract homes landing in the $11,000 to $15,000 range. We work throughout the 91340 and 91341 ZIP codes, from the civic center to the foothill edges near Lopez Canyon and Paxton Park. If you’re reading this because your roof is showing age, leaking, or just went through another Valley summer, call (833) 467-4901 for a free inspection and a written line-item estimate. We don’t quote over the phone without seeing the roof first. That’s a rule, not a preference.
Why Huntington Beach Roofers Is San Fernando’s Preferred Roof Replacement Company
Neil Stratton built this company on a simple sequence: inspect first, recommend second. San Fernando homeowners keep hiring us because we carry seven roofing brands, not one, which means the material we suggest actually matches your roof’s pitch, your home’s age, and your budget. We’re not married to a single manufacturer’s inventory. We’re married to getting the tear-off and decking scope right before a nail goes in.
We’ve reroofed enough stucco tract homes in the 91340 flats to know what’s waiting under the visible layer. That matters when the bid you got from another contractor didn’t account for a 1959 hot-mop roof buried under two shingle overlays. Our San Fernando customers call back because our allowances hold up when the roof gets opened. If you’d like to talk through what we’re seeing on roofs in your neighborhood, call (833) 467-4901.
Styles & brands we work with
New Roof Installation in San Fernando
New Roof Installation in San Fernando usually means one of two things: a full replacement on an existing home, or a brand-new roof on an addition or new build. In either case, the 91340 inspection process is the same. We pull the permit, document what’s under the old roofing, and write the scope in plain language so you know exactly what you’re buying before materials go on the truck. A typical new roof on a 1,300 to 1,600 square foot San Fernando tract home lands between $10,500 and $16,000, with architectural shingles at the lower end and premium systems like CertainTeed or Boral higher.
Replacement on Existing Homes
When the existing roof has hit end of life, we strip to the decking, inspect the framing and sheathing, and quote any replacement decking as a written allowance before we start. No one opens a 1962 San Fernando roof and finds a perfect deck. We plan for that. The price you sign is the price you get unless you approve a change in writing.
New Construction and Additions
For new construction in San Fernando, we work from the plans and coordinate with your framing and waterproofing schedule. We install from GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral, so the spec isn’t limited by what one distributor has in the yard on a given week. If the plan calls for a low-slope system, we handle flat roofing as well.
Reroofing in San Fernando
Reroofing in San Fernando is where we earn our keep. Most homes here were built between 1950 and 1965, and a lot of them are on their second or third shingle layer. Reroofing means tearing off everything down to the decking, documenting what’s underneath, and rebuilding the roof assembly the way code requires now, not the way it was done in 1958. On a typical 1,400 square foot San Fernando home, reroofing runs $11,500 to $17,000, with tear-off depth and decking replacement as the two biggest swing factors.
Layered Tear-Off and Decking Scope
In the 91340 flats, what looks like one shingle layer is often two or three. Underneath that, we routinely find the original hot-mop built-up roof still adhered to the sheathing. That’s a heavier tear-off, more disposal, and often a larger decking replacement than the visible top layer suggests. We write these as allowances in the contract, never as a surprise change order.
Code-Triggered Upgrades
A San Fernando reroofing permit opens the roof assembly to current code. That can include upsized rafters, new OSB or plywood sheathing, new drip edge, and ice and water shield at the eaves and valleys. We factor these into the estimate before we start, not after. When the inspection opens the assembly, we already know what’s likely there.
Trusted Brands We Service in San Fernando
We carry one of the widest brand portfolios in the trade: GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. On San Fernando homes, we install a lot of Roof Replacement systems from CertainTeed and GAF because the product lines map well to the low-slope and mid-century framing we see here. Atlas and Tamko come up often for homeowners who want a mid-tier architectural shingle with solid impact resistance. Boral we recommend on some Spanish-style homes near the civic center where a heavier profile suits the architecture. We stock standard underlayment, flashing, and ridge vent materials locally, which keeps turnaround tight without waiting on distributor transfers.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Replacement Problems We See in San Fernando Homes
- Second and third shingle layers hiding the original 1950s hot-mop built-up roof. Tear-off and disposal scope balloons once we expose the decking. We plan for this with written allowances, not change orders.
- Original undersized framing and aged sheathing that can’t carry a new layer. A permit inspection opens the assembly and forces decking replacement mid-job. We price that before the tear-off starts.
- Failed flat-roof drainage and flashing at penetrations. Winter rain tests low-slope sections long after the top layer looked fine, and the 91340 flats get hit hard because drainage was often undersized at original build.
- Intense summer UV aging shingles faster than coastal LA. San Fernando sits in the hot semi-arid east Valley. Asphalt shingles and tile underlayment break down more quickly here, which shortens the replacement cycle compared to the coast.
Pricing for Roof Replacement in San Fernando, CA
A standard architectural shingle roof replacement on a San Fernando tract home runs $10,500 to $15,000. Add a layered tear-off with hot-mop removal and you’re at $13,000 to $17,000. Premium systems like CertainTeed Landmark Pro or Boral slate-look profiles land between $16,000 and $22,000 on a 1,500 square foot home. The two biggest cost drivers are decking replacement (typically $2.85 to $4.10 per square foot when the old sheathing won’t pass inspection) and tear-off depth. Every estimate from us includes a free roof inspection and a written, line-item price. Call (833) 467-4901 to schedule yours.
We Also Serve Cities Near San Fernando
Our crews run the same inspection-first process throughout the east Valley. In addition to San Fernando, we regularly work in North Hills, Shadow Hills, Northridge, and Van Nuys. The housing stock changes block by block out here. The process doesn’t.
Serving San Fernando, CA — Our Local Coverage Area
We’re based in the San Fernando area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Replacement in San Fernando
The short answer is what’s under the top layer. In the 91340 flats, we routinely find two or three shingle generations sitting on the original 1950s hot-mop built-up roof. That means heavier tear-off, more disposal, and often decking replacement once the permit inspection opens the assembly. A low bid usually means the contractor didn’t write those allowances. Call (833) 467-4901 and we’ll show you exactly what we found and what it costs before you sign.
Yes, always. We don’t give a roof replacement price without standing on the roof first. Neil Stratton built this company on a diagnostic-first approach, and that inspection is free. We document the layers, check the decking, and produce a written line-item quote so you’re not comparing vague numbers across two different scopes.
Opening a roof assembly in San Fernando can trigger current code requirements for sheathing thickness, rafter sizing, drip edge, and ice and water shield at the eaves and valleys. On a 1960s tract home, that often means new plywood or OSB decking and upgraded flashing. We write these into the estimate as allowances so no upgrade shows up mid-job without your written approval.
Put both scopes next to each other line by line. Look at tear-off layers, decking allowance, underlayment type, brand and product line, drip edge, flashing, and disposal. A lower price that doesn’t mention the hot-mop layer underneath isn’t a lower price. It’s a smaller scope. Call (833) 467-4901 and we’ll walk through our estimate with you so you can compare apples to apples.
Yes, if the material and assembly match the climate. We specify shingles rated for the intense UV that ages asphalt faster here, and we install the low-slope drainage components the original 1950s tract homes never had. CertainTeed and GAF both manufacture product lines suited to the Valley’s heat cycle. We’ll recommend the one that makes sense for your roof’s pitch and your home’s age.
Written by Neil Stratton, Owner at Huntington Beach Roofers, serving San Fernando since the company’s founding.